Boards

VME64-SVEC

6U VME64 Mezzanine Carrier for FMC Modules
Application FPGA: Spartan-6 XC6SLX150T-FGG900
System memory 2 x 256 MB DDR3
Open Hardware (Published under CERN OHL)

VME64x interface

Two Low-Pin Count FMC slots

No dedicated clock signals from Carrier to FMC
(as only available on HPC pins and use LPC)

FMC connectivity: all 34 differential pairs connected, 1 GTP transceiver with clock, 2 clock pairs, JTAG Xilinx FPGAs

Application FPGA: Spartan-6 XC6SLX150T-FGG900

Direct connection to all resources such as VME64x, memories and FMC connectors

System FPGA: Spartan-6 XC6SLX9-2FTG256C

Provides VME bootloader, early oscillator/PLL config

Configuration Flash memory for both Main FPGA and Application FPGA configuration

FPGA configuration from SPI flash or via VME Clocking resources

1 x 10-280 MHz I2C Programmable XO Oscillator, starts up at 100 MHz
(Silicon Labs Si570, freely usable)

1 x 25 MHz TCXO controlled by a DAC with SPI interface
(AD5662, used by White Rabbit PTP core)

1 x 20 MHz VCXO controlled by a DAC with SPI interface
(AD5662, used by White Rabbit PTP core)

2 x low-jitter frequency synthesizer/ fanout
(TI CDCM61004, fixed configuration, Fout=125 MHz, used by White Rabbit PTP core)

On-board memories
Reset push button

2 x 256 MB (2 GBit) DDR3
(16-bit bus, MT41J128M16HA-15E)

1 x 128 MB SPI flash for FPGA firmware storage
64 kBit EEPROM (24AA64T-I/MC)
connected for storing application parameters

1 x I2C configuration EEPROM (24LC64)

Miscellaneous

On-board thermometer IC (DS18B20U+)

Unique 64-bit identifier (DS18B20U+)

Front panel

1 x SFP port (White Rabbit compatible)

4 x LEMO/SMC programmable I/Os capable of driving 3.3V@ 50 ohm

2 x mini DisplayPort connectors for high-speed serial GTP links (not for video)

8 x programmable LED

VME64-SVEC
VME64x Interface; 2 x FMC Sockets
BO-FVM-SVEC0

References

Navigation lights at airports are essential devices for all-weather and safe landing and take-off for aircraft. In additon to runways ... Read more

News

Janz Tec marks the start of a partner program at launch event Read more
At Hannover Messe 2018, Janz Tec will be introducing high-security Industrial IoT solutions for networking as well as cloud connections for shop floors. Read more
Secure IoT solutions and services individually tailored to your business Read more
In addition to the tried and tested CAN-PMC/FD, Janz Tec is expanding its portfolio to include the new CAN-PCIe/FD, which is available with up to 4 CAN channels. Read more